Full Motion Tilt VESA TV Wall Mount Bracket Swivel 24 32 37 40 42 Inch

Product Details:
- Low Profile ‘Slimline’ design: 67mm from wall
- Extends up to 415mm from the wall
- Pivot/Swivel: up to 90 degrees each way (left/right)
- Tilt: +5 degrees to 12 degrees (Up/Down)
Cable management hoop
Features:
- Low Profile ‘Slimline’ Design:Most of the other brackets which can tilt forwards and also pivot/swivel left and right are quite bulky and can’t fold up very compactly, making it difficult to position your TV close to the wall. This bracket doesn’t have that problem: it can fold back to within 67mm of the wall. Please note however that many manufacturers recommend that LCDs and plasmas are not to be mounted within a certain distance from the wall (refer to your TV’s user manual), due to heat and ventilation concerns which may shorten the lifespan of your television.
- Horizontal Swivel/Pivot (Left/Right):This bracket allows you to swivel/pivot your TV up to approximately 90 degrees to the left and right. Please note that larger TVs may be limited to an angle smaller than 90 degrees.
- Vertical Tilt (Up/Down):This bracket allows you to tilt your TV up and down approximately +5 degrees (upward) to 12 degrees (downward).
Screws/Bolts:This bracket includes a variety of screws/bolts which are suitable for most installations. Unfortunately, due to the enormous range of TV brands and models available, we’re unable to guarantee that the included fixings will suit every installation.
Specifications:
- Horizontal Pivot/Swivel: 90 to +90 degrees (approx)
Vertical Tilt: +5 degrees to 12 degrees
Distance from wall: 67mm to 415mm
- Maximum weight capacity: 25kg
- Total width of bracket: 430mm
- Total height of bracket: 420mm
- Maximum mounting hole spacing (horizontal): 400mm
- Maximum mounting hole spacing (vertical): 400mm
- Suits VESA standards 400×400mm, 400×200mm, 200×200mm, 200×100mm, 100×100mm, and 75×75mm
- This bracket will also fit holes spaced anywhere between 200mm and 400mm apart.
Please Note:
- As with all wall brackets, if mounting on plasterboard walls it is essential that this bracket is fixed to timber studs. This bracket can also be mounted on brick/concrete walls. This bracket is suitable for single studs.
Will it fit my screen?
- This bracket will fit your TV screen (and not be visible from front on) if your TV is:
At least 500mm wide.
At least 450mm tall.
- The four threaded mounting holes on the back of your TV need to be:
No more than 400mm apart side to side.
No more than 400mm apart top to bottom.
- Maximum TV weight capacity is 25kg.
Package Included:
- 1 x TV Wall Mount
Notes:
- The colors may be a little different for the different monitor display.
- Please allow minor deviation due to manual measurement