Easily install a dog flap in your glass or wood door or wall.

What's more, when you install a Transcat Door, you can finally get rid of the litter tray and allow your cat the freedom to come and go as it pleases.

The Transcat white cat door is versatile, and equally at home installed in glass or wood. It has a white frame with clear flap and 4-way locking tab that is operated from inside.

So that means:

Sleep without interruption - your pets love to stay inside with you, but also need the flexibility to come and go, that's why every home needs a Transcat Pet Door.
Convenience for you during meals, at night, and when you're out - you won't have to worry about letting your pet in or out throughout the day or night.
Convenience and protection for your cat - they can go outside for exercise and come back inside when it's too hot, cold or scary.
Hygiene - You can choose to eliminate the litter tray or, like us, put it outside.
Protect your furniture - Pets can sometimes scratch furniture and doors if they can't get out when they have to go out!

Features:

Weather resistant flap;
Transparent rigid flap with magnet;
Polycarbonate with magnetic catch to stop the flap from opening at will;
4-Way lockable security barrier so you decide which pet comes in and out;
2 year Manufacturer's Guarantee.

Designed for glass or wood installation. .

Overall door measures 23.5cm square. Inside door thickness is 20mm, outside door thickness is 10mm.

Opening measures 14cm high x 14.5cm wide.

Shape:	Square
Colour:	White frame, Clear flap
Dimensions:	Overall Size - 235mm
	Opening Width - 145mm
	Opening Height - 140mm

This Small Transcat pet door is ideal for cats and small dogs such as maltese, chihuahua, jack russell, or similar sizes.

To install in a glass window or door:

A circular hole is simply cut by a competent glazier and your Transcat fitted in the following manner:

The hole in the glass should be cut 223mm (8¾”) in diameter.

The two main parts of the Cat Door are then clamped with the glass between. Use the shorter of the screws supplied. IMPORTANT! Assemble the door so that the frame with the flap is on the outside

Use a manual screw driver to tighten the screws. Do not over tighten to prevent unnecessary stress being placed on the glass. This is sufficient to hold the door.

To install in a wooden panel or door

This Transcat Cat Door is designed to be installed into wooden panels up to 38mm (1½”) thick.

Mark and cut out a square 185mm x 185mm (7¼”)

Tip – Decide where you want the bottom of the Cat Door to go i.e. the level that you want your cat to step through. Then draw a straight horizontal line. Either use a level or draw you line parallel to something else that is horizontal. This line can be the starting point for marking the cut out.

The two main parts of the Cat Door are then clamped with the wooden panel between. Use the longer of the screws supplied.

IMPORTANT! Assemble the door so that the frame with the flap is on the outside.

This product is sold by a third-party seller and they are responsible for their product, the content of their listing and any exchanges or returns of their product.

All products sold by third-parties are subject to the Customer Charter and comes with guarantees that cannot be excluded under the Australian Consumer Law.